3D sleigh is giant and adds a powerful punch to any show! It measures 70" long by 41" wide by 53" tall.
The sleigh is made out of 10mm coro.
Holds 815 12mm pixels. I used a alternating pattern with my lights to help with seeing lights from any angle. You can wire it any way you want the wiring diagram will still work.
Comes in multiple pieces and is very easy to put together. This sleigh utilizes over 3 full sheets of material.
Xlights models are included included. I broke it into 5 different models for ease of wiring and each piece will plug into the next. It is recommended to assemble the sleigh prior to wiring.
When importing the Xlights models they go in the following order:
Skis are easier to wire if you click on sub model, add then double click on gray box next to ode ranges.
1. Skis (assemble and wire first)
Assemble Sleigh prior to wiring.
2. Right side
3. Front
4. Left side
5. Back side
Pictures below give you an idea on how I built mine. I used 1" PVC and 1"PVC caps to connect to skis with 1/4 x 20 bolts, nuts and washers. Sleigh does not come with nuts, bolts, or PVC pieces
Drill hole big enough for 1/4" bolts in top of the 1" caps insert bolt through washer then into top of skis then into cap, tighten then put in the 1" piece of PVC.